SF	-	-06	D4-02-2B2-A2
Series number	Remark	Valve size	Suitable solenoid valve
THF SDF SD SFD SF SKF	N:body main    valve only  -:solenoid valve    with:	06 10	refer solenoid valve

Model	Suitable solenoid valve	Rated flow ℓ/min	Max.operating pressure mpa	Weight kg
				With sol	Without sol
THF-06	-	120	25	5.7	-
THF-10	-	240	25	8.7	-
SF-06	02-2B2	120	25	5.7	7.2
SF-10	02-2B2	240	25	8.7	10.2
SDF-06	02-2B2	120	25	5.7	7.2
SDF-10	02-2B2	240	25	8.7	10.2
SFD-06	02-2B2	120	25	6.2	7.7
SFD-10	02-2B2	240	25	9.2	10.7
SD-06	02-2B2	120	25	5.5	7
SD-10	02-2B2	240	25	8.5	10
SKF-06	02-3C4	120	25	6.5	8.35

1、THF series pressure tracking control valve used in hydraulic cylinders, hydraulic motors need for speed control of the situation, with pressure compensation device, and therefore the pressure change does not affect the import and export traffic, traffic noise and the Throttle completely disappeared. Traceability of its inlet pressure load pressure, it can reduce the pressure loss, saving electricity, to prevent the oil temperature rise.
2、SF series by adjustable flow control valve and solenoid valve solenoid consisting of two-step speed control valve, the size of normal flow control, solenoid valve movement, the flow can freely pass, applied to the implementing agencies need to slow, speed control of a rapid two occasions, suitable for injection mold organ loop, press bed, work station, etc..
3、SDF series is adjustable flow control valve and solenoid valve composed of a single-stage speed control valve, the normal flow cut-off, solenoid valve movement, the flow size can be controlled. Applied to the electric signal control to open the implementing agencies to stop action, while the occasion needs to speed control for injection molding machine hydraulic motor circuit, lifts and so on.
4、SFD series of electromagnetic two-stage control valve used in hydraulic cylinder speed of the need for slow, fast, speed control of the situation in Sec. Injection molding machine for open-loop mode, press bed, machine tools and so on.
5、SD series is a flow valve and electromagnetic valve solenoid control valve comprising a hydraulic circuit, electrical signal switching power, suitable for injection molding machine circuit.
6、SKF Series Double solenoid type control valve for use in hydraulic cylinder speed of the need for slow, fast, fast speed control of three sections, because there are pairs of electromagnetic coils, so the speed can be flexibly applied for precision injection molding machine, punch working machine tools and so on.